- Power Relay (40A)
- Blade Fuse (30A)
- 2 sets of power connectors to light fixtures
- Illuminated Rocker Switch On/Off Rocker LED
- User Manual
- Choose your desired mounting location for the switch. Mark and drill one 3/4″ hole.
- Use a sheet metal screw to mount the relay around the battery. Make sure the RED wire from the relay can be connected to the positive terminal of the battery while the BLACK wire can be grounded to the chassis.
- Connect the WHITE wires to the positive input line of the auxiliary lights.
- Connect the BLACK wires to the ground connection line of the auxiliary lights.
- Connect and install the WHITE wire from the relay to the middle pin of the switch (COPPER colored).
- Link the RED wire to the outer pin (COPPER colored) of the switch then route and connect it to a steady power source. Please make sure to use an in-line fuse rated at a minimum of 3A 12V DC when connecting this power feed wire directly to the battery. As your other option, you can also install this wire into an existing power wire in the cabin or into the cabin fuse box and this will exclude the need of an inline fuse.
- Attach the BLACK wire to the pin of the switch (GOLD colored), route it then connect it to the ground chassis.
- Finally, push the switch into the 3/4″ hole that you drilled out (Step 1)
40A Power Relay & 30A Blade Fuse
2 sets of power connectors to light fixtures
Illuminated Rocker Switch On/Off Rocker LED
Compatible with power source from 10 to 30 Volt DC.
Frequently Bought Together
This item: EPAuto 12V 40 Amp Off Road LED Light Bar Wiring Harness Kit, 40A Relay / Fuse / ON-OFF Switch$0.00
EPAuto 12" 72W 7200lm Auto Car Work Cree LED Combo Beam Light Bar, Mount for Jeep / Van / Wagon / ATV / SUV / Pickup / Off-road (Waterproof IP67)$29.87
Topcarlight 4 Pairs 8 Pcs 4" Inches Spot Beam 8 Degree Off Road Cree 18w LED Work Light Bar 4wd Boat UTE Driving ATV Car$45.98
Nilight 20" 126w LED Flood Spot Combo Driving Fog Light Led Light Bar Work Light for SUV Boat 4x4 Jeep Lamp,2 Years Warranty$35.00